International Journal of Applied Sciences & Development
E-ISSN: 2945-0454
Volume 5, 2026
Technical Issues on Constructing Ultralight Drones via Additive Manufacturing
Authors: , , , , ,
Search Articles
Abstract: This study focuses on technical considerations on constructing ultralight drones, using CAD software for their 3D printing. 3D printing technology offers the possibility of using a variety of materials, while at the same time being distinguished by its accuracy and speed. First, an extensive historical review of the development of drones, CAD software, 3D printing, and the basic principles of drone aerodynamics and stability is presented. This is followed by the design suggestions for a drone, using Fusion 360 to draw the 3D models. After designing them, we may proceed to simulations to test if they can endure the forces and heat, generated by their engines. Static stress analysis can be performed, through which we may find whether the model is subject to deformation from the forces generated by the motors. Then, with the help of static analysis, we may eliminate the deformation. After confirming that the drone can endure the mechanical stresses, generated by the thrust of its motors, we may proceed to the thermal analysis that confirms which materials can withstand temperatures up to 70°C, thus ensuring the drone’s functionality under typical operating conditions. The combination of certain materials offers high rigidity, impact resistance, and structural flexibility.
Pages: 200-209
DOI: 10.37394/232029.2026.5.21